Trendnet TEW811DRU User Manual download pdf (Page 55)

TRENDnet User’s Guide

TEW-811DRU

Upgrade your router firmware

Administrator > Settings Management

TRENDnet may periodically release firmware upgrades that may add features or fix

problems associated with your TRENDnet router model and version. To check if there is

a firmware upgrade available for your device, please check your TRENDnet model and

version using the link. http://www.trendnet.com/downloads/

In addition, it is also important to verify if the latest firmware version is newer than the

one your router is currently running. To identify the firmware that is currently loaded on

your router, log in to the router, click on the Administrator section and then on the

Status. The firmware used by the router is listed at the top of this page. If there is a

newer version available, also review the release notes to check if there were any new

features you may want or if any problems were fixed that you may have been

experiencing.

1. If a firmware upgrade is available, download the firmware to your computer.

2. Unzip the file to a folder on your computer.

Please note the following:

• Do not interrupt the firmware upgrade process. Do not turn off the device or

press the Reset button during the upgrade.

• If you are upgrade the firmware using a laptop computer, ensure that the laptop

is connected to a power source or ensure that the battery is fully charged.

• Disable sleep mode on your computer as this may interrupt the firmware upgrade

process.

• Do not upgrade the firmware using a wireless connection, only using a wired

network connection.

• Any interruptions during the firmware upgrade process may permanently

damage your router.

1. Log into your router management page (see “Access your router management page

”

on page 31).

2. Click on Administrator and click on Upload Firmware.

3. Depending on your web browser, in the Upload Firmware section, click Browse or

Choose File.

4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is

located and select it.

5. Click Apply. If prompted, click Yes or OK.

Allow/deny ping requests to your router from the Internet

Advanced > Advanced Network

To provide additional security, you may want to disable your router from responding to

ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is

network communication test to check if a device with IP address is alive or exists on the

network. By disabling this feature, you can conceal your router’s IP address and

existence on the Internet by denying responses to ping requests from the Internet. You

can additionally use this feature as a tool for troubleshooting purposes.

1. Log into your router management page (see “Access your router management page

”

on page 31).

2. Click on Advanced, and click on Advanced Network.

3. Click the WAN Ping Respond drop-down list and select Enabled to allow ping requests

from your router to the Internet.

5. To save changes, click Apply.

Note: If you would like to discard the changes, click Cancel before you click Save.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Comments to this Manuals

No comments

Trendnet TEW811DRU User Manual Page 55

Comments to this Manuals

Related products and manuals for Networking Trendnet TEW811DRU