Trendnet AC1750 User's Guide download pdf (Page 11)

TRENDnet User’s Guide

TEW-815DAP

Set the device to access point mode

Main > Device Mode

Note: By default, the device is set to function in access point mode.

1. Log into your access point management page (see “

Access your access point

management

page” on page 7).

2. Click on Main, click on Device Mode.

3. Click the Device Operation Mode drop-down list and select Access Point.

4. To save changes, click Apply.

Choosing your device mode

Access Point (AP) Mode

By default, your access point functions in Access Point mode, creating a wireless

network to allow wireless client devices to connect and access your network resources

and access the Internet.

The diagram below shows your access point connected to one of your router LAN ports

and functioning in Access Point mode allowing wireless clients (ex. laptops, game

consoles, DVRs, Smart TVs, and mobile devices, etc.) to wirelessly connect to your

access point to establish network and Internet connectivity.

Note: The TEW-815DAP has dual band wireless capability allowing the access point to

broadcast a wireless network name on two separate bands, 2.4GHz and 5GHz. Wireless

clients can connect to your access on either band depending on the wireless band

supported by your wireless client. The 2.4GHz band is more commonly used and

supported for general applications such as Internet access and web browsing. The 5GHz

band is less commonly used and supported which can be more useful for higher or stable

bandwidth application requirements such as media streaming as this band may be less

likely affected by neighboring wireless networks operating on the 5GHz band.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 58 59

No comments

Trendnet AC1750 User's Guide Page 11