Trendnet TV-IP600 User Manual download pdf (Page 32)

TV-IP600/W Wireless Network Camera

Using the Camera Web Manager

The camera is easy to use and manage. Use a normal web browser to access the camera’s live

video display, as well as the configuration software. It is recommended to check and make sure the

computer can access and use the camera before placing it in the location where it will be used,

especially if it is mounted to a ceiling or other area that is difficult to physically access.

For the initial setup, use the SetupWizard program located on the TV-IP600/W CD-ROM included

with the camera. Use the IPCam Wizard to assign an IP address and other network settings. Once

the camera has an IP address, follow the instructions below to access the camera’s web

management interface used to manage the camera and for video display.

Accessing the Camera Video Display

If the camera is used on a network with an active DHCP server, the camera will detect it and obtain

an IP address. If you are using the camera on a network with a DHCP server it is necessary to first

determine what the IP address of camera is. To do this, follow the instructions in the Quick

Installation Guide to launch the Setup Wizard to link to the cameras.

NOTE: If your network uses DHCP or has an active DHCP server running, use the Setup

Wizard utility on the installation CD-ROM shipped with the camera to first access the camera.

Once it is accessed, you can change the IP address or continue to use the DHCP assigned

address as preferred. See the Quick Installation Guide for instructions on using the Setup

Wizard utility.

If your network does not use a DHCP server, the camera will use a default IP address of

192.168.10.30. Use this address to access the web-based management software. Use a web

browser and type in http:// followed by the default IP address, 192.168.10.30 in the address bar of

the browser and press the Enter key. The URL in the address bar should read:

http://192.168.10.30

If the login dialog does not appear, check the proxy server settings on your browser.

NOTE: The wrong proxy server settings on your browser can prevent connection to the web

manager. If you are having trouble connecting to the web interface of the VLAN Switch,

configure the proxy settings to bypass the proxy server or disable use of proxy servers and try

to connect again.

To check proxy setting for Windows Internet Explorer:

1. In Windows, click on the Start button, go to Settings and choose Control Panel.

2. In the Control Panel window, double-click on the Internet Options icon. (Alternatively you

can access this Internet Options menu using the Tools pull-down menu in Internet

Explorer.)

3. Click the Connections tab and click on the LAN Settings button.

4. Verify that the “Use proxy server” option is NOT checked. If it is checked, click in the

checked box to deselect the option and click OK.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 109 110

No comments

Trendnet TV-IP600 User Manual Page 32