Trendnet TK-RP08 Installation Guide download pdf (Page 6)

English

Rack Mount

The KVM Switch can be mounted in an EIA standard-size, 19-inch rack,

which can be placed in a wiring closet with other equipment.

Your installation is now complete.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

Note: If you would like to mount the KVM switch to a EIA 19” equipment rack,

install the included mounting brackets to the sides of the KVM switch, secure

them with the screws provided, and then mount the KVM switch to the equipment

rack with the hardware provided by the equipment rack manufacturer.

1. Attach the mounting brackets to

both sides of the KVM switch and

secure them with the provided

screws.

2. Carefully position the KVM switch

onto the rack. Align the bracket to

the screw holes on the rack, then

use the screws provided with the

equipment rack to mount the KVM

switch.

1 2 3 4 5 6 7 8 9 10 11

No comments

Trendnet TK-RP08 Installation Guide Page 6