Trendnet TFC-1600MM Manual download pdf (Page 11)

To reboot for the software setting.

2-1-2 Factory Reset

This function is to set the device back to the default setting in case of the messy setting.

2-1-3 Image Update

Figure (10)

The section is to set the TFTP Server IP Address first, and the default address was set to

“192.168.1.2”. The Image File can be updated by uploading the image file from the

TFTP server. (Figure 10)

Note: The content of the image file will write the whole firmware of the management module, please

be sure that the image file is correct.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Trendnet TFC-1600MM Manual Page 11