2-3 SNMP Configuration
Figure (16)
Get Community Name: to get the device community name (default = public).
Set Community Name: to set the device community name (default = private).
Trap Community Name: to authorize the device trap community name
(default = public).
Trap Host IP Address: to set the trap host IP address (same as monitoring station
IP address).
Cold Start trap: to set the trap for rebooting the device (default = enable).
Authentication Fail Trap: to set the warning trap when the community
name of the device and workstation are different (default = enable).
Power Fail Trap: to set the Power Fail Trap (default = enable).
Fan Fail Trap: to set the fan fail trap (default = enable).
MC Plug-in Trap: to set the trap of the Media Converter module if it is
plugged in (default = enable).
MC Pullout Trap: to set the trap of the Media Converter module if it is
pulled out (default = enable).
Comments to this Manuals