Trendnet TW100-BRF114U User Manual download pdf (Page 11)

Introduction

3. Connect WAN Cable

Connect the DSL or Cable modem to the WAN port on the TW100-BRF114U. Use the

cable supplied with your DSL/Cable modem. If no cable was supplied, use a standard ca-

ble.

4. Connect Printer Cable

Use a standard USB printer cable to connect your printer to the USB Printer port on the

TW100-BRF114U.

5. Power Up

• Power on the Cable or DSL modem.

• Connect the supplied power adapter to the TW100-BRF114U and power up.

Use only the power adapter provided. Using a different one may cause hardware damage

6. Check the LEDs

• The Power LED should be ON.

• The Status LED should flash, then turn Off. If it stays on, there is a hardware error.

• For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the PC is

also ON.)

• The WAN LED should be ON.

• The Printer LED should be ON.

For more information, refer to Front-mounted LEDs in Chapter 1.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 98 99

No comments

Trendnet TW100-BRF114U User Manual Page 11