Trendnet TW100-BRF114U User Manual Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 99
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
Broadband Router User Guide
58
Data - Special Applications Screen
Checkbox
Use this to Enable or Disable this Special Application as required.
Name
Enter a descriptive name to identify this Special Application.
Incoming
Ports
Type - Select the protocol (TCP or UDP) used when you receive data
from the special application or service. (Note: Some applications use
different protocols for outgoing and incoming data).
Start - Enter the beginning of the range of port numbers used by the
application server, for data you receive. If the application uses a single
port number, enter it in both the "Start" and "Finish" fields.
Finish - Enter the end of the range of port numbers used by the applica-
tion server, for data you receive.
Outgoing
Ports
Type - Select the protocol (TCP or UDP) used when you send data to
the remote system or service.
Start - Enter the beginning of the range of port numbers used by the
application server, for data you send to it. If the application uses a sin-
gle port number, enter it in both the "Start" and "Finish" fields.
Finish - Enter the end of the range of port numbers used by the applica-
tion server, for data you send to it. If the application uses a single port
number, enter it in both the "Start" and "Finish" fields.
Using a Special Application
Configure the Special Applications screen as required.
On your PC, use the application normally. Remember that only one (1) PC can use each
Special application at any time. Also, when 1 PC is finished using a particular Special Ap-
plication, there may need to be a "Time-out" before another PC can use the same Special
Application. The "Time-out" period may be up to 3 minutes.
If an application still cannot function correctly,
try using the "DMZ" feature.
Multi-DMZ
This feature, if enabled, allows one (1) or more computers on your LAN to be exposed to all
users on the Internet (if you only have 1 WAN IP addresses, only DMZ 1 can be used), allow-
ing unrestricted 2-way communication between the "DMZ PC" and other Internet users or
Servers.
This allows almost any application to be used on the "DMZ PC".
The "DMZ PC" will receive all "Unknown" connections and data.
If the DMZ feature is enabled, you must select the PC to be used as the "DMZ PC".
The DMZ feature can be Enabled and Disabled on the Advanced Internet screen.
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 98 99

Comments to this Manuals

No comments